UniFi Cloud Gateway Fiber Wall Mount 90°
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
UniFi Cloud Gateway Fiber in a 90° rotated orientation.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 62
- Wydruki
- 0
- Wyświetlenia
- 591
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial
I made a wall mount that fits my new UniFi Cloud Gateway Fiber in a 90° rotated orientation (the screen automatically rotates). It fits perfectly on all sides and doesn't block the ventilation or the NVMe SSD storage compartment.
Due to the tight dimensions: be careful not to scratch the device. I used some sandpaper to smooth out the overhanging parts that were supported. Adjusting the settings of the supporting will probably speed up the print as well.
Due to spatial restrictions I was forced to place the mounting holes on the side.
As I'm new to 3D designing: I probably made some weird designing choices :-)
Feel free to improve/change/remix the model to your own liking!