Sage coffee machine wand cleaner & spanner
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A spanner and nozzle cleaner for a Sage barrista express coffee machine.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 67
- Wydruki
- 0
- Wyświetlenia
- 221
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A simple replacement part for the steam wand cleaner on the Sage Barista Express. The central spanner-shaped cutout is a nice fit for removing the wand tip. To complete the tool, you'll need to insert a needle into the end to serve as the hole-cleaning pin.
I printed mine in Prusament PC Blend CF Black—mainly because it was the only filament I had at the time—but it worked well, especially for use while the wand was still hot. If you're able to let the wand cool down, PLA or PETG should also work fine.
To add the cleaning pin, I reused the one from my original broken tool. I heated it with a small blowtorch, pulled it out, and bent one end into a loop. Then I heated the looped end and pressed it into the printed part to melt it securely in place. This method ensures it stays firmly embedded.