1 / 3
12AX7, 6080 tube holders — zdjęcie 1
1 / 3

12AX7, 6080 tube holders

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Stands for vacuum tubes 12AX7/ECC83/6N2P etc and 6080/6AS7/5998 etc, variants for ×1, ×2, ×4 bulbs.

Ocena
0 / 5
Polubienia
2
Pobrania
38
Wydruki
0
Wyświetlenia
143
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Audio
Licencja
Creative Commons — Public Domain

Vacuum tube holders to keep tubes in safe within easy reach and also to make them nicely exhibited.

Designed for 12AX7 and 6080 tubes, also there is many models for the same socket.

The idea was to make simple and stable stand. It has a wide bottom and a plain circle furrow instead of being a real socket.

Versions for 1, 2 and 4 tubes are attached.

If a printed part is too tight for tube terminals, it is possible to edit the attached FreeCAD project. For 12AX7 find Cylinder002 and Cylinder003 inside group x1 and tune their radius. x2 and x4 parts will be also changed. Project for 6080 is more accurate and can be fine-tuned with a Spreadsheet table. 

Thanks for @Cameron_2472117 for his tube holder which inspired me to make the other one.

Thanks for @grocerylist_2753269 for 6080 stand request and measurements.

Tagi