1 / 2
Hohlstrahlrohr/Fog Nozzle/Hollow Jet Pipe with — zdjęcie 1
1 / 2

Hohlstrahlrohr/Fog Nozzle/Hollow Jet Pipe with

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Remix of SmokySGs exellent decorative Fog Nozzle.

Ocena
5 / 5
Polubienia
8
Pobrania
63
Wydruki
1
Wyświetlenia
505
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

Printed in Sunlu Matte PLA for the most part, only the red is some leftover other brand of PLA.

Its quite hefty: 13h print time @0.2 layer height with a 0.4mm nozzle, 3 walls, 4 layers top and bottom, 12% cross hatch infill. 420g filament used.