1 / 3
Skadis Beoplay Portal Headphone holder - extra wide
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
extra wide version that fits the beoplay portal perfectly. extra wide so it never indents upon the fabric
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 126
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
extra wide version of the R75, thats also deeper (60 instead of 30mm) so the Beoplay Portal doesn't have to touch the board. also extra wide so there won't be any marks on the foam on top (the original version dented my headphones).
print with 2 of the original pegs (flip the peg over in your slicer, prints without support. i've reorientated the holder, not the original pegs)
print in PLA 0.2 layer Height, 10% cubic infill. No support needed.
