X-Shot Micro 2.0 Reshell 1 v1.0 - elastic mod
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adds a loop for elastic to increase power
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 27
- Wydruki
- 0
- Wyświetlenia
- 460
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Added small brackets at the top of the frame, so that you can add a M3x30mm bolt (and sleeve to prevent wear on the elastic) and tie loops of elastic around the plunger.
*** DO NOT DRY FIRE - ESPECIALLY IF YOU REMOVED THE AIR RESTRICTOR ***
I used slingshot elastic (OD 4mm) but elastic cord could also be used. Managed to fit 3 loops of the elastic (30cm) but the force to prime it could be too much for kids. You can always use fewer loops.
With added power, you can better use barrel inserts which fire larger/more darts such as :
- My Ultra Dart barrel insert : https://www.printables.com/model/1343121-nerf-ultra-dart-insert-for-x-shot-micro-20
- Corvus Mega Dart insert : https://www.printables.com/model/1190370-mega-dart-launcher-spigot-easy-barrel-insert-v12
- Corvus also has 3x Elite dart/inline clips here : https://www.printables.com/model/1310599-masterkey-x-shot-micro-2-reshell-picatinny-mega-da
Also modified the trigger curve slightly
Please print the frame with at least 6 walls and 15% infill