1 / 1
Ender 3 NG v1.2 DIN rail mount for ACS712 power sensor module — zdjęcie 1

Ender 3 NG v1.2 DIN rail mount for ACS712 power sensor module

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Mount your ACS712 power sensor module to the electronics panel of your Ender 3 NG v1.2

Ocena
0 / 5
Polubienia
12
Pobrania
33
Wydruki
0
Wyświetlenia
243
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This model helps you mount your ACS712 power sensor module to the electronics panel of your Ender 3 NG v1.2!  The power sensor module sends an analog signal output that can be read by SoC modules (Raspberry Pis, LattePanda Delta 3, etc.) or Arduino modules.  Using this module, you can report the power usage from your printer to Klipper.

Here is the module on Amazon: https://www.amazon.com/dp/B0D1KBL98K

I opted to include a spacer because the power module appears to have high-current traces right under the screw mounts!  The spacer keeps the bottom of the screw head from scuffing the PCB mask and bridging these connections.  It has clearance for the ACS712 IC.  Please use it!

Tagi