BMW E30 Sanden AC Compressor Bracket for M20 Engine
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a collection of files to test fit, modify, and cut a Sanden compressor bracket for an M20 engine.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 128
- Wydruki
- 0
- Wyświetlenia
- 554
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This is a collection of files to test fit, modify, and cut a Sanden compressor mount for a M20 engine, utilizing the OEM M20 compressor supporting bracket (64521717007). Compressor personally used was a Sanden 508 SD5H14. This bracket may work with other 8 eared Sanden compressors, such as the 709, but fit may vary. I recommend 3D printing the STL models first to ensure correct fitment. New hardware will also be needed.
You will need:
- E30 Sanden Compressor_Wing x 2
- E30 Sanden Compressor_Bar x 2
- Top Left Spacer (L 24.5mm x OD 12.5mm)
- Top Right Spacer (L 14.5mm x OD 12.5mm)
- Bottom Left Spacer (L 6mm x OD 12.5mm)
- Spacers can be purchased online or machined. See pictures for layout. Poly or metal could be used.
Once cut, break all edges and deburr. Assemble the bracket on compressor, off vehicle, ensuring that the bracket is true and level. Tack weld to hold bracket structure together, remove from compressor and finish welding. Pool weld where bar end mates to wing. Consider welding backside of mate as well.
This work is licensed under a Attribution-NonCommercial-NoDerivatives Creative Commons 4.0 International license, meaning all posted works may not be used for commercial purposes/resale. Attribution must be given when sharing. Derivates are not allowed.