1 / 2
Bees water platform to drink with bottle reservoir
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Use any PET bottle with standard head as reservoir for water and invite bees (and other insect) for a drink
- Ocena
- 5 / 5
- Polubienia
- 391
- Pobrania
- 958
- Wydruki
- 3
- Wyświetlenia
- 5766
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 3) (Komentarze: 8)Remiksy (1)Kolekcje (425)Powiązane
I failed to find useable water station for bees, therefore I created this one. It's 130x130mm, with 114 hex-shaped platforms for insect to drink from. It's compatible with any PET bottle with standard top. I tested up to 0.7l big one and it was stable.
I recommend to use PETG or ASA or any thermo-stable plastic for print, but can be actually printed from anything. PLA tends to wrap on direct sun…
Uses approx 65g of plastic…
