Peerless Faucet or Delta Model: RP60121 Block and O-Rings
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement quick disconnect clip for Peerless/Delta quick Disconnect hoses.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 34
- Wydruki
- 0
- Wyświetlenia
- 224
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Needed to replace the broken clip the installer had “repaired” with duct tape. No models existed online and I was unable to purchase a single new clip from anywhere!
Some quick measurements of the unbroken clip yielded this.
Print at 45 degree angle for strength and use tree supports. Printing at 0 degrees or 90 degrees isnt strong enough using PLA. 45 degrees gives a strong clip.
Be warned you will only get this on once. In order to be strong I had to sacrifice flexibility so it may come off once with the press tabs but the second time I was unable to release it without cutting it out. No big deal it is easy to snip the tabs with flush cutters and extract.
Hope this saves your kitchen reno project!