1 / 2
Autofeed for Lathe Cross-Slide
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Autofeed for Lathe with Drill
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 397
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (4)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (10)Powiązane
Autofeed Jig for the Cross-Slide of my HBM 25x550 Norton Profi Lathe. Stick the Jig on the Handwheel of the Cross-Slide and run it with a battery powered drill.
I made this as a two part model because I wanted to try it out:-)
You will need a M8 threaded rod and some M8 nuts for the axis.