1 / 4
Triumph Daytona 765 Moto2 throttle tube
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Throttle tube to fit replacement grips. Original part is T2044901-1473.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 33
- Wydruki
- 0
- Wyświetlenia
- 222
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Throttle tube for the Triumph Daytona 765 Moto2 to fit after market grips. The original part is T2044901-1473. I measured that and modeled a new tube that would fit my after market grips.
Use at your own risk. You need to print them in a material that has very strong layer adhesion so it doesn't break when you grab it too hard. It also needs to survive heat and the outside.
I haven't decided what material I'll use yet. Probably Nylon or PC. Maybe not from an FDM but SLS printer.
The photos just show a test print.