1 / 3
Shark Vacuum Attachment - Pet Hair/Upholstery/Brush — zdjęcie 1
1 / 3

Shark Vacuum Attachment - Pet Hair/Upholstery/Brush

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

An attachment for a Shark vacuum to help remove pet hair from chairs, etc. UPDATE Aug. 2025!

Ocena
0 / 5
Polubienia
13
Pobrania
131
Wydruki
0
Wyświetlenia
637
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Public Domain

UPDATE : August 14, 2025 - A slightly modified version has been added. This modified version (04) has small holes on either side of the end of the nozzle; these holes provide more airflow when vacuuming a flat surface, and this greatly helps remove pet hair. Both versions work, but I recommend the improved version.

This was made for a Shark vacuum model NV480 26, but will likely work with other Shark vacuum models, or with vacuums with a hose fitting of 35mm diameter. 

My Shark vacuum has no brush attachment, so I made this replacement. It is not really a brush of course, but the “teeth” on the end of the nozzle help to comb pet hair from the fabric on a chair, sofa, etc. Aside from helping to remove pet hair, I find it also works well in just vacuuming upholstery generally.

If you find this attachment useful, you may also be interested in my dual attachment holder for the Shark vacuum; see here :

https://www.printables.com/model/1349089-shark-vacuum-dual-attachment-adapter

Assembly and Use

No assembly is required; however, I “flame polished” the teeth on the nozzle to give them smoother and more rounded ends. This was done by using the flame of a butane micro-torch.

Print Instructions

Print in PLA using the 3mf files provided, otherwise :

  • 0.2mm layer height
  • 3 perimeters
  • no infill
  • inner brim
  • supports : to ensure good bed adhesion, I added three painted on organic (tree) supports

CAD

The OnShape 3D CAD files for this are here :

https://cad.onshape.com/documents/92e803d8288e5416ccc459c1/w/f2fbd48630945a8d0cc00244/e/1575e547d2cb132287cc202a?renderMode=0&uiState=686c50cee86b1716056406ac