voron v2.4 350mm insulated enclosure panel clips
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
panel clips to allow the use of 1/2in thick pir and 3mm panels. insulation for much warmer chamber temperatures.
- Ocena
- 5 / 5
- Polubienia
- 55
- Pobrania
- 82
- Wydruki
- 1
- Wyświetlenia
- 1744
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
i got tired of the 360 degree view of my abs parts warping off my bed due to lower than optimal chamber temps. in my room my chamber temps topped out at 58C. larger abs prints warped off the bed or warped the spring steel print surface off the heated bed. made these for myself and im posting as a few other have asked for them. i apologize right now but these are plastic and hardware hungry 36 m3x25 screws per side plus the two m5 screws for the back panel bowden/umbilical pass through. also main color needs 2kg's of plastic and one for accent color. however i was able to gain 20C in my chamber with just this mod. i hover between 75C and 80C now. the 1/2in pir insulation is only $20 at manards or lowes (jonhson mayville with foil face) and a single 4x8 sheet can do two printers and its super easy to cut. this was designed to work with the clicky clacky door. lower hinges were modified for screws to go from the corner clips into them however you absolutely can just ignore the two screw locations and leave them blank.
Clips accommodate 3mm foam tape, 3mm acm panels like i used or your stock clear panels and the 1/2in pir.
two bowden pass throughs are available the standard blanking style and the pug pass through
if using the pug pass through print my modified back plate but the rest of the parts are located here.
Umbilical Rear Passthrough for PUG by therick | Download free STL model | Printables.com