1 / 2
Sodola 8x2.5G + 1x10G SFP Switch 10-in Rack Bracket — zdjęcie 1
1 / 2

Sodola 8x2.5G + 1x10G SFP Switch 10-in Rack Bracket

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A 1U, compression-fit, screw-less 10-inch rack mounting bracket for a Sodola 8x2.5G + 1x10G SFP Switch

Ocena
5 / 5
Polubienia
9
Pobrania
47
Wydruki
1
Wyświetlenia
308
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Computers
Licencja
Creative Commons — Attribution — Noncommercial

A 1U bracket to mount a Sodola 8x2.5G + 1x10G SFP Switch in a 10-inch rack

I designed and printed the Skeleten, a 10-inch rack to house my homelab. I wanted it to contain everything I needed, except maybe a NAS. 

From top to bottom:

2U - Vented TP-Link EAP610 WiFi AP Bracket

1U - Beelink EQ14 (pfSense firewall)

1U - Patch panel from Amazon

1U - Sodola 8x2.5G + 1x10G SFP Switch Bracket

1U - Minisforum GK41 Bracket (low power Proxmox node)

1U - EliteDesk G3/G4/G5 Bracket (additional Proxmox nodes; one is a G3, one is a G5, both fit the same bracket.

1U - EliteDesk G3/G4/G5 Bracket (additional Proxmox nodes; one is a G3, one is a G5, both fit the same bracket.

1U - Vented blank

1U - Solid blank

 

 

 

Sodola 8x2.5G + 1x10G SFP Switch Bracket

This bracket is a compression fit. With the calibration of my Bambu A1, this is a perfect snug fit that allows for plugging and unplugging network cables in the front without the switch slipping in the bracket. 
 

This model is offset to the right in order to center the ethernet ports in the rack.

Tagi