Minisforum GK41 10-in rack mounting bracket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A 1U, compression or screw retention 10-in rack bracket for the Minisforum GK41 mini-pc
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 51
- Wydruki
- 0
- Wyświetlenia
- 255
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial
A 1U bracket to mount a Minisforum GK41 in a 10-inch rack
I designed and printed the Skeleten, a 10-inch rack to house my homelab. I wanted it to contain everything I needed, except maybe a NAS.
From top to bottom:
2U - Vented TP-Link EAP610 WiFi AP Bracket
1U - Beelink EQ14 (pfSense firewall)
1U - Patch panel from Amazon
1U - Sodola 8x2.5G + 1x10G SFP Switch Bracket
1U - Minisforum GK41 Bracket (low power Proxmox node)
1U - EliteDesk G3/G4/G5 Bracket (additional Proxmox nodes; one is a G3, one is a G5, both fit the same bracket.
1U - EliteDesk G3/G4/G5 Bracket (additional Proxmox nodes; one is a G3, one is a G5, both fit the same bracket.
1U - Vented blank
1U - Solid blank
Minisforum GK41 Bracket
The rubber feet must be removed before inserting the mini-pc into the bracket.
This bracket is a compression fit. If you prefer, it can be secured in the bracket by its mounting holes using commonly found computer screws. The bracket has a filleted recess that is shaped to match the mini-pc’s rounded corners, giving this a smooth flush fit. With the calibration of my Bambu A1, this is a perfect snug fit that allows for plugging and unplugging USB cables in the front and for operation of the power button without slipping in the bracket.
