1 / 2
MK2.5 & MK3 Heatbed Screw Connector 60 Deg Cable Cover — zdjęcie 1
1 / 2

MK2.5 & MK3 Heatbed Screw Connector 60 Deg Cable Cover

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This replaces the stock cable cover with one that angles the cable 60 deg. Great for small places and enclosures.

Ocena
5 / 5
Polubienia
34
Pobrania
231
Wydruki
7
Wyświetlenia
1171
Oceny
8

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

Much nicer look with hex heads on top.

No modifications are required to heat bed/cables in order to fit this cover on the heat bed with screw connectors. This has been tested on a heat bed with screw connectors. This does allow clearance for the hot end for full “Y” travel.

Just updated with a version (V6) that has no slot for the LED to shine through. This can be used for clear filaments so the LED can shine through the filament.

You will need

  • M3x10 screw (4x)
  • M3 nut (3x)
  • M3 nyloc nut (1x, for connection to board)


 

Tagi