Mock Suppressor
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Building Toys
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The Manta-MS (mock suppressor) was designed with easy printing and function in mind. All models are print oriented and require minimal support.
Multiple versions and sizes to fit a variety of blasters. PCAR version increases accuracy by adding spin to the dart.
Manta Collapsing stock : https://www.printables.com/model/1346695-collapsible-picatinny-stock
Instructions
Print your choice of body, rear plate and front plate. Super glue or epoxy both plates to the body. 16mm exposed barrel versions will require one M3x12mm bolt and one M3 nut to attach to the barrel.
For flywheel, measure the opening of your barrel and choose the appropriate rear plate to fit. It should friction fit tightly inside. Sizes vary from 23mm to 26mm. The model is extremely easy to modify if you need a different size or leave a comment with your measurements and I'll upload a new model with your requested measurements.
I greatly appreciate your time checking out this model! I upload new models weekly! :)