EasyDrain - Hair catcher (46mm)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This model is intended as a replacement hair catcher for some of the EasyDrain shower drains.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 127
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This model is intended as a replacement for some of the EasyDrain shower drains.
The main body diameter is 46mm. It's held above/within the drain by 4 prongs.
Compared to the original model, this one has a handle attached, to make hair removal easier.
For the EasyDrain_MeshBySlicer model, make sure to set the top and bottom shell layer count to 0 within your slicer. The pattern can be selected by the sparse infill pattern. Granularity can be adjusted by the sparse infill density.
For printing either of the two options, I'm recommending 4 wall loops.