1 / 3
BGA Reballing Spoon for a very narrow bottles
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Important: Print with Arachne wall generator and 0.4mm nozzle. The spoon capacity is about 70 balls in 0.45mm diameter.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 44
- Wydruki
- 0
- Wyświetlenia
- 145
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Public Domain
This is a remix of Bga balls spoon by UraniumBottle
Changes regarding the original model:
- Scaled to 50%
- Cut the bottom to make it printable without supports. This has a bonus effect of laying flat on a surface thus keeping the contents inside the spoon if placed.
Initially printed it with a 0.2mm nozzle because of a small size. Later tried it with a 0.4mm and was surprised that it actually worked.
Printing tipps:
- Arachne wall generator
- 0.4mm nozzle
- 0.1mm layer height
