Welcome to Race to the Summit! The Vertical Board Game
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Strap on your Hiking Boots and pack up your Climbing Gear. It’s a race to the top of the summit!
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 111
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Noncommercial
Welcome to Race to the Summit!
Strap on your Hiking Boots and pack up your Climbing Gear. It’s a race to the top of the summit
Be the first Team of Two Climbers to reach and plant your Team Flag at the top of the mountain using a limited amount of equipment. Watch out for falling rocks or avalanche, and don’t leave your Team member behind!
Refer to the "Race to the Summit Rulebook" for Printing, Assemble, Setup, and gameplay rules. Requires 2 standard playing die.
12 STLs (Usage and Completion Time based on Bambu Labs A1 Mini)
Multiple Filament colors are recommended:
To distinguish Player Pieces. Each Player requires: 1 Flag, 2 Climbers, 8 Ledges, 6 Ladders (2 to 4 Colors)
To distinguish Public Ladders and Ledges Pieces from Player Pieces (1 Color)
Rock Pieces (1 Colour) can be same color as Public Pieces, or different color
Treasure Pieces (1 Color) Can be same color as Rock Pieces, or different color
Base Pieces (1 Color)
Top, Mountain Side, and Connector Pieces (1 Color) Can be same color as Base Pieces, or different color
Race_2_Summit_Flag.stl (1print per Player Colour) - .4mm Nozzle .12mm Layer Height
Filament: 0.08m, .25g :: Print Time: 2min (x 2+)
Race_2_Summit_Climber_2.stl (1print per Player Colour) - .4mm Nozzle .12mm Layer Height
Filament: 0.80m, 2.43g :: Print Time: 25min (x 2+)
Race_2_Summit_Ledge_8.stl (1print per Player Colour, 2 print for “Public” Pieces separate colour than Players)
.4mm Nozzle .12mm Layer Height. Filament: 3.52m, 10.67g :: Print Time: 40min (x 3+)
Race_2_Summit_Ladders_8.stl (1print per Player Colour, 2 print for “Public” Pieces separate colour than Players)
.4mm Nozzle .12mm Layer Height. Filament: 0.82m, 2.50g :: Print Time: 20min (x 3+)
Race_2_Summit_Top.stl (1print) - .4mm Nozzle .12mm or .20mm Layer Height – Require Support
Filament: 14.60m, 44.25g :: Print Time: 3:25min
Race_2_Summit_Base.stl (2print) - .4mm Nozzle .12mm or .20mm Layer Height
Filament: 26m, 79g :: Print Time: 5hrs (x 2)
Race_2_Summit_Walls_4.stl (8prints) - .4mm Nozzle .12mm or .20mm Layer Height
Filament: 6m, 17g :: Print Time: 1hrs (x 8)
Race_2_Summit_Connector.stl (4prints) - .4mm Nozzle .12mm or .20mm Layer Height
Filament: 3m, 9g :: Print Time: 45min (x 4)
Race_2_Summit_Rocks_8.stl (2print) - .4mm Nozzle .12mm or .20mm Layer Height
Filament: 1.75m, 5.25g :: Print Time: 40min (x 2)
Race_2_Summit_Treasure_6.stl (2print) - .4mm Nozzle .12mm or .20mm Layer Height
Filament: 1.25m, 3.65g :: Print Time: 30min (x 2)
Optional Mouse and Cheese Game Pieces
Race_2_Summit_Cheese_12.stl (1print) - .4mm Nozzle .12mm Layer Height
Race_2_Summit_Mouse.stl (2print per Player Colour) - .4mm Nozzle .12mm Layer Height
NOTE: The STL Models may display some artifacts from revision builds, but will not appear in Print
RECOMMEND: Allow pieces to cool to room temperature on printers Heatbed before removing to avoid warping
A .2mm Space Allowance / Tolerance was used for the .4mm Nozzle Print