Wall Hook
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This model is an invisible wall hook that you cannot see the screws.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 25
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a hook you can use to hang whatever you want. you just screw the screws into a stud and then slide the cover/hook on, and you cannot see the screws or under pieces. If your hook breaks just reprint the hook part not the whole thing!! I am working on more hook/covers that you can slide onto the same screw plate that are Stroger and bigger if you have any type of hook, you want created leave a comment or review and I will do my best to make them. Holds around 25 pounds before the hook breaks but I will make ones that can hold way more!!
15% infill
3-5 walls
No supports orient it, so it does not need them it could affect how smooth the hook slides on and off.
use 6 X 2"screws
by the way it has offset of .2 which is good for most printers