1 / 6
360 camera tripod mount (for Ambisonic capture)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a tripod mount that allows you to mount your 360 camera and Ambisonic sound recorder at the same time
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 91
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution
This is a compact tripod mount designed to hold both your 360 camera (tested with the Insta360 One Inch) and an ambisonic sound recorder, while minimizing visibility in the stitch line.
- The mount is compatible with the Ulanzi Claw quick-release system, allowing you to easily attach and detach your camera and recorder. (Note: additional mounting screws are required.) https://www.ulanzi.com/collections/claw-quick-release-system/products/ulanzi-claw-quick-release-system-generation-ii
- It was primarily designed with the Zoom H2n and H3 recorders in mind. Two mounting positions are included to help align the recorder precisely with the camera for optimal capture.
- I printed the mount in PETG for durability, using approximately 45% infill. For the tripod attachment, you’ll need to install a standard threaded insert at the bottom. I strongly recommend using 100% infill in that area to ensure strength and reliability.
- The design leaves a minimal footprint in the 360° stitch line, though the visibility increases slightly when using wind protection.