1 / 1
Parsun F2.6, carburetor part no: F2.6-04000214 — zdjęcie 1

Parsun F2.6, carburetor part no: F2.6-04000214

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a cap inside the carburetor, and it needs to be made from TPU.

Ocena
0 / 5
Polubienia
0
Pobrania
8
Wydruki
0
Wyświetlenia
46
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

When repairing the Parsun F2.6 outboard carburetor, I noticed a missing cap. Without it, the engine would flood after a short time. The original cap is probably rubber, but I replaced it with one I 3D-printed in TPU (I used Creality CR-TPU). You can likely use any TPU, but I recommend testing it by leaving the part in fuel for a while to make sure it doesn’t lose its properties. My replacement has been running for two months now without any problems.