Power Rangers Ninja Storm - Thunder Morpher Disks
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Ninja Storm Thunder Morpher Disks. Fit original Bandai toy. Includes Navy and Crimson Thunder Disks.
- Ocena
- 0 / 5
- Polubienia
- 22
- Pobrania
- 105
- Wydruki
- 0
- Wyświetlenia
- 1142
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Costume Accessories
- Licencja
- Standard Digital File License
Power Rangers Ninja Storm - Thunder Morpher Discs
V3 Model (Final Version) is now available:
NO AMS REQUIRED - ONLY 1 COLOUR CHANGE - NO SUPPORTS
There are two versions available:
- No Clip (Display) - Designed to sit snugly on the original morpher. Does not to recreate the original clip mechanism, since the plastic on these toys is over 20 years old and I didn’t want to risk damaging it. The disks stay on securely through friction fit — in my testing, they don’t come off unless you deliberately pry them off. PLA is fine for this
- Tight Clip (Cosplay) - Designed as a 1:1 replica and clips into the original clip mechanism in the morpher. I'd only recommend these if you need to part to stay on tightly and not come off even with intense movement (e.g. COSPLAY). Recommended to print in PETG.
Updated V2 model:
- Model adjusted for AMS Printing
- Rounder appearance of outer disk
- Changed support type to traditional for easier and cleaner removal
- Minor adjustments to keep models inline with Wind Morpher Disc Model
Thunder Storm! Ranger Form! Ha!
For those of us who hold this show close, this one’s for you.
I bought the Thunder Morpher second-hand, but the Navy Thunder disk was long gone. So I decided to model both disks myself — the Crimson Thunder disk is based on the original Bandai toy, and the Navy Thunder disk was recreated using reference photos.
Both disks are designed to sit snugly on the original morpher. I chose not to recreate the original clip mechanism, since the plastic on these toys is over 20 years old and I didn’t want to risk damaging it. The disks stay on securely through friction fit — in my testing, they don’t come off unless you deliberately pry them off. If it's too loose it might be worth scaling it down very slightly, although I've printed 5 of these now during my development and had no issues.
If you run into any issues, feel free to reach out. If you print it, I’d love to see it alongside the rest of your Power Rangers collection!
Complete your collection:
Power Rangers Ninja Storm - Wind Morpher Discs
Power Rangers Ninja Storm - Battlizer Morpher Disc
Cyclone Morpher Disc - Power Rangers Ninja Storm
All my Power Ranger related models can be found here.
All my Dummy 13 models can be found here