1 / 2
LSG Lone Star Grillz Santa Maria Crank Wheel Handle
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Created a mountable crank wheel handle for easy one handed operation
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 38
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Created a mountable crank wheel handle for easy one handed operation
Crank Wheel Compatibility
- My crank wheel ring measured at 20.125" ID x ½" thick. Cross bars measure at ½" x ¼" closest to the ring. There is some wiggle room in the design (hence the rubber gasket material)
Hardware Required
- 20mm ID x37mm OD x 9mm H ball bearings (2) https://a.co/d/9nQ3rfS
- M4 x 20mm stainless steel screws (4) https://a.co/d/1dqFnQK
- Fits screw head dimensions: 9mm width x 2.25mm height
- M4 stainless steel nuts (4) https://a.co/d/39uc0AC
- Fits nut dimensions: 5mm height x 6.85mm width across flats
- rubber gasket / foam strips ½" wide x ~1mm thick https://a.co/d/8SnC7be
Printing
- PETG, ASA, ABS for high temp resistance
- Supports required for the mount pieces
Assembly
- Line the grooves of the mount pieces with the rubber gasket. The design intentionally leaves some space to add the gaskets and ensure a tight fit.
- Secure mount pieces to the crank wheel using M4 screw and nuts
- Slip both ball bearings on the mount post
- Slip the knob onto the ball bearings