Prototype 3D printed marching tenor sticks (2 part) (EXPERIMENTAL)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I need some good practice sticks so I don't ruin my good ones. Get rid of the same problem for yourself (hopefully)
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 91
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Attribution — Noncommercial
I really need a cheap set of practice sticks I can rely on for my marching tenors so i will be uploading and tweaking the design on this continuously until they are balanced and weighted. Extra hardware may be needed with the final model for proper weight.
PLEASE print these as they are oriented, printing the sticks upright will make them break due to the stress in between the layer lines.
SANDING IS NECCESARY for these sticks so that they are comfortable to hold and don't scratch your heads.
Print the sticks in PETG so they last longer, and the guards in TPU so they have a muted sound to them. I have also added a split file version for a smaller printer because it was too big to fit on mine.
you will need 2 of the guard file and 2 of either the split or whole stick file for a set of sticks.
Print settings:
Supports: yes, any kind
Infill: Grid, 100%
Ironing: Maybe…? I will try it and see if it does anything
Top and bottom surface pattern: whatever, I used rectilinear
Filament: PETG for sticks, TPU for guards
I highly reccomend waiting until this model is no longer experimental to try these out, but if you want to help troubleshoot the design i would appreciate it.
if you wanna sell them please ask and Ill probably say yes, I just would rather my models not be sold without me knowing.