Arrma Infraction Rock deflector/ Wheel wells
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Please share the link back to this thing when you share your builds! Its part of the attribution license I shared this…
- Ocena
- 5 / 5
- Polubienia
- 30
- Pobrania
- 252
- Wydruki
- 2
- Wyświetlenia
- 1541
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
Please share the link back to this thing when you share your builds! Its part of the attribution license I shared this under, Thank You!
Side skirts fit on a cr-10 size bed, wheel arches fit on smaller printers. Split skirts coming soon
You will need 10-20 6-12mm m3 flat head screws to mount the arches to the side skirts, I ran with only 2 screws per arch during testing just fine with only 6mm long screws, holes support up to 12mm though.
If you like the design please consider tipping so I can buy more tires or different bodies.
5/13:
Added templates for drilling out existing skirts, align the front and rear 2 holes.
Added a split side skirt
3/10/23
Added Step and Fusion 360 Files of skirts and wheel arches
1/10/26
Uploaded mirrored Left side files and orginized files
Print Settings
Supports:
Yes
Notes:
Rear arch needs supports, block supports from generating in screw holes. For the time being mirror for left side
Category: R/C Vehicles