NECCHI Q132A sewing machine spool pin
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Spool pin of my NECCHI Q132A sewing machine was lost, I design and 3D print one new similar to the original one
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 41
- Wydruki
- 0
- Wyświetlenia
- 154
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Design:
I design the part in Fusion 360 similar to the original part of my NECCHI Q132A sewing machine.
There are 2 things to be considered that are key fort a correct installation and fitting. The bottom part must fit the 6mm square hole without gap (Red arrow) and the 10mm circular stop must enter the top of the hole (Blue arrow)
Printing:
I printed the pin in PLA, but sure other material like PETG or ABS will do the job. Printing parameters are: 0,15mm layer height, 4 perimeters and 100% infill for a good strength (No empty space). Supports are needed for the bottom part
Compatibility:
NECCHI part number is H3JY013210 and is compatible with NECCHI models K132A, K417A, K121A, K408A, K432A, Q132A, Q421A, NC-102D, NC-103D, NC-204D, C360
It's also compatible with other brands like Bernette or EverSewn
On top of .stl and .3mf files, I uploaded Fusion 360 .f3d and .step files so you can modify the design and adapt it to your needs.
As usual, feedback and comments (and for sure "likes") will be always welcome. Feel free to post nice pictures of your makes.
You can also look at other parts I designed and 3D printed for my sewing machines
- Foot-pedal box for NECCHI Q132A sewing machine
- TPU storage block for sewing machine bobbins
- Rubber feet for Singer 7184 sewing machine
- Hook Drive Gear #174488 for Singer 7184
Enjoy
If you like this model, take a look also at my other designs in Printables.