Kobra S1 ACE "not-so-pro"
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
For users of the standalone S1, like myself, i created a topcover with ventilation slots and a quasi-ACE.
- Ocena
- 5 / 5
- Polubienia
- 38
- Pobrania
- 68
- Wydruki
- 1
- Wyświetlenia
- 1725
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Anycubic Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
For users of the standalone S1, like me, who have no interest in multicolorprinting (or whatever reason) i created a riser with ventilation slots and an ACE-like dryer, which is intended to warm and dry the filament inside by thermal convection from the printing chamber.
I cut out a few windows and inserted 2mm plexiglass panels into them.
The riser is split into 4 pieces, which have to be screwed together.
For mounting the riser you will need:
12x M5x15mm screws
12x M5 nut
24x M5 washers
the top cover
if you want to mount the “ACE not-so-pro”, you will need in addition
8x M5x15
8x M5 nut
16x M5 washers
Links:
Rollerbearings:
https://share.temu.com/bRpaj27o5cB
Hygrometer:
https://share.temu.com/hwHRUpWHrEB
I would be grateful for feedback