Mug holder for Intex Inflatable armchair
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a mug holder I made for my Intex Inflatable Armchair for the pool. It also fits beer cans (tested on Heineken).
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 35
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This cup holder was modeled in SolidWorks (SLDPRT file included).
Printed in PETG on a Bambu Lab P1S with a 0.2 mm layer height.
PLA should work too, but PETG is recommended due to better mechanical strength — the walls are quite thin.
For printer settings I used the Default settings for Bambulab PETG Basic and the 0.2 mm Standard print quality.
Print with supports.
Included files are SLDPRT, STEP, STL → All contain the same model though.
Originally featured in my YouTube Short — check it out here:
Feel free to hit me up on YouTube if you have any questions!