1 / 2
Toyota Tacoma / T100 Rear Sliding Window Latch Catch
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a catch for the rear sliding window of a Gen 1 Toyota Tacoma or T100 Pickup.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 39
- Wydruki
- 0
- Wyświetlenia
- 428
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (15)Powiązane
This is a catch for the rear sliding window of a Gen 1 Toyota Tacoma or T100 Pickup. There are other files for the large latch but none had the catch side (which I was missing). This includes the outer mount, a gasket and the catch. The mount and seal should be the same for both sides of the window.
I printed all parts at 100% infill and out of ASA but should have done the gasket in TPU if I had any. I just installed this today and will update this if I have any issues.