K1 Max w/ CFS Z offset test
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I needed to edit the model as the Y value shortens by 5mm after the upgrade, as per Creality Wiki.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 74
- Wydruki
- 0
- Wyświetlenia
- 503
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
This is a NEW Z offset test for the K1 Max after you install the CFS upgrade. While trying to mess with my machine I noticed my printer kept telling me that It was outside of the Y coordinates. I checked the Creality Wiki to see if anything change and according to them we lose 5mm off the Y axis. So I edited the test model and I am reuploading so there is no confusion.
While trying to Print, my machine would throw an error that the machine is out of Y coordinates even with 295 for Y.
You can use this to make adjustments to your Z offset on the fly so you get a better first layer. Once you are happy with the printing results I suggest you keep this information somewhere so you have it for future reference. You can also save this info in fluidd if your machine is rooted.