Grimsmo SAGA Pen Holder with Base

I modified the original made by @partypancake8 to add a base to make it more sturdy.  The base has text which reads “Grimsmo SAGA”, you can change the text using the OpenSCAD file if you like.

The files associated with this remix are as follows.

• GrimsmoSagaHolderWithBase.3mf all you need to print in Prusa Connect,  I have split the model so the base is printed with clickable connectors.  It will print without supports.  the file is configured for hex infill, Prusament PLA and no supports.  My model is the Core One you can of course change these settings to your printer and material.
• GrimsmoSagaHolderWithBase.stl STL file in case you want to print with supports or slice it a different way
• GrimsmoSagaHolderWithBase.scad OpenSCAD code I used to add the base and original the model file it imports.  You can make your own changes using this file and the imported copy of the original.
• SAGA_PEN_HOLDER_V2.stl Original file from @partypancake8, it is imported by the OpenSCAD file, place it in the same folder or fix the path in the code to import this file.

One important quote from partypancake8 “To make sure that your saga fits properly ensure that there are no little bits of overhang on the top side of the hole. The fit is correct as long as the top bridge is clear of any little bits of plastic. I just cleared it out with a knife and the fit is perfect.”   

The first time I printed the original model I thought I needed to make it bigger but it turns out you just need to remove a little bit from the top bridge of the top side hole.  A quick pass with a deburring tool works very well.