Robo blockade - Robot vacuum barrier for tray tables with 1" tube frame
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A barrier to prevent robot vacuums from high centering on tray tables.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 162
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Living Room
- Licencja
- Creative Commons — Attribution
General:
A simple clip-on robot vacuum barricade
Why I designed this:
I designed this because my robot vacuum gets high centered almost every day on my couch table.
Printing notes:
Layer height: .2
Recommended Material: PLA or PETG
Supports: None
Infill: 15% Gyroid or triangle
Walls: 2-3
Other Modifiers: Print as oriented
Material Quantity: ≈13 grams each
I printed from PLA on Prusa XL at .2 layer height with 15% gyroid infill.
Cautions and updates:
If you plan to take these off regularly, PETG is probably a better choice, as it will be more resistant to creep.
_____________________________________________________________________________________________________________
Don’t forget to follow me, post a make, leave a like, or tell me what you don’t like so I can make improvements.
Thanks, and Happy Printing!
Also check out:
https://fabtechmfg.square.site/