Fishnet-Wearing Winged Female Tiefling Sorcerer w/ staff, ball - incl. supported model
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
My fishnet-wearing tiefling sorc/wizard/warlock now with wings!
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 105
- Wydruki
- 1
- Wyświetlenia
- 395
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Characters & Monsters
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Based on pose of Z. Tsereteli's ballerina statue amd an anatomical drawing of a fruit bat skeleton. I printed the supported model and have uploaded the make. Print went well.
It really is amazing what you can 3D print these days.
[Update: I've added another STL file with slightly thicker wing membranes. The original ones (which were about 0.16mm thick) printed fine with the mix of 95% Siraya Tech Fast/5% Siraya Tech Tenacious I use, but might not print as well on other resins, so I thickened the membranes to 0.25mm thick. I also cleaned up some voids under the ponytail and reinforced the “root” of the wings were they join the body. The thicker-winged version has “R4” in the name.]