Creator Pro/CTC/Qidi Tech 1 Extruder Motor Blank
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Motor blank to replace unused extruder in Replicator 2 clones (Flashforge Creator Pro, CTC, Qidi Tech 1)
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 38
- Wydruki
- 0
- Wyświetlenia
- 545
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
In many cases, the second extruder in the dual extruder printer isn't used. Each stepper motor added a lot of weight to the print head. This increases ringing/ghosting and other artifacts in prints. It also affects the printers ability to operate at higher speeds. Removing the stepper is an easy and a free way of improving print quality. I chose to remove the right extruder motor since the left one is closest to the cooling fan which helps with bridging.
This motor blank serves as a stand in for the unused extruder in Replicator 2 clones (Flashforge Creator Pro, CTC, Qidi Tech 1). The blank prevents the bracket at the top of the print head from slouching when the motor is removed.
Print Instructions:
- Layer height: 0.20 mm
- Infill: 20%
- Supports: None
Build Instructions:
- Print motor blank per instructions
- Remove the extruder motor
- Remove the fan grill and heat sink if desired (doesn't remove significant weight)
- Screw in the motor blank to the back side of heat block (as show in cover photo)