Hygrometer Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Hygrometer stand designed for 45mm Diameter hygrometers that have the retaining clips offset by 25-30 degrees.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 83
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution
This hygrometer stand is designed for 45 mm diameter circle hygrometer models that have retaining clips at a 35 degree offset.
The objective of this project was simply to design a stand for the hygrometers that I purchased off of amazon (link: ) that unfortunately when put into existing stands and desiccant boxes dies not display the readout horizontally.
Print times on a modern printer like my Bambu lab P1S are under 45 minutes with default settings for my profile:
- Walls: 2
- Top Layers: 5
- Bottom Layers: 3
- Infill: 10%
Printing with the face down is best.
I will add print photos soon.
I have included the Fusion 360 archive (.F3D) of the project that includes the hygrometer model I used as the cutting tool so that you can adjust the rotation as needed. Enjoy!