1 / 9
Reincarnation of an old lamp — zdjęcie 1
1 / 9

Reincarnation of an old lamp

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

We are replacing the old incandescent lamp with an LED one.

Ocena
0 / 5
Polubienia
1
Pobrania
4
Wydruki
0
Wyświetlenia
32
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Gadgets
Licencja
Creative Commons — Attribution — Noncommercial
  1. Remove the button and metal prongs from the old night light.
  2. Solder the wires to the metal pins and insert into the new housing.
  3. Solder the wires to two segments of LED strip and solder them to the 12V output of the power module.
  4. Solder the wires from the metal pins to the 220V input of the power module. Solder the dismantled switch into the joint of one wire.
  5. Glue pieces of LED tape to the plane at the top of the lamp.
  6. Using glue, stick the top cap onto the ice tape.
  7. Place everything in the case and close the bottom with a lid.

Place a decorative flower-shaped element on top of the lamp.

Your old favorite lamp will serve you for many years to come.