1 / 8
Revell Junior Kit 864 Disney Cars 3 replacement screwdriver
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Since the screwdriver tends to break off when you step on it or get lost. I constructed a replacement in two variants.
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 119
- Wydruki
- 0
- Wyświetlenia
- 1405
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 1)Remiksy (0)Kolekcje (16)Powiązane
Since the screwdriver tends to break off when you step on it or get lost. I constructed a replacement in two variants. Both can be printed without support material. The normal version is simply printed standing up and can then be used directly. After printing, a 6mm x 35mm hexagon is glued into the "Hardcore" version. I used an old hex wrench to do this. I printed both versions from PLA with 60% infill 5 wall lines and 4 layers top and bottom.