Diesel DZ4273 / DZ4272 replacement watch strap
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement strap for the Diesel DZ4273 / DZ4272
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 142
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Men
- Licencja
- Creative Commons — Attribution — Noncommercial
Replacement strap for the Diesel DZ4273 / DZ4272 watches.
These are discontinued models from 2013 and the official replacement straps are out of stock everywhere.
Use the nuts, screw and latch from your original worn strap. Some of them look like rivets but you can unscrew them.
Print in your preferred flexible filament, I've printed it in TPE 83A with 15% infill as a first test but honestly I believe that 100% in this case would the best option.
A tiny bit of superglue on the strap is needed to hold the buckle in place, as in the original strap. You might want to print the hoop twice, as you probably want two of them, one fixed and one free to slide.