Tough sword - collapsible or pool noodle options!
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A relatively simple, easy to assemble, yet strong collapsible sword.
- Ocena
- 5 / 5
- Polubienia
- 21
- Pobrania
- 118
- Wydruki
- 1
- Wyświetlenia
- 1157
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution — Noncommercial
Why I designed this:
My 5 year old loves this kind of stuff. Most of the swords I've found for printing wouldn't hold up to his abuses. It was also a fun experiment, since I've never done one of these before.
Printing notes:
Layer height: .15 or finer is ideal to prevent binding when extended aggressively.
Recommended Material: PLA works, but ASA or ABS would be better for strength.
Supports: None
Infill: 15% Gyroid or triangle
Walls: 3+
Other Modifiers: Print as oriented
Material Quantity: ≈180grams
For multi-color, the blade can be printed separately from a different material.
I printed from PLA on Centauri Carbon at .15 layer height with 15% triangle infill in 5h45m.
Cautions, notes, and updates:
Don't put your eye out.. or your brother's.
The outer shell of the blade slides into the groove in the handle. It fits nicely without glue, but if you're going to get aggressive, a bit of adhesive along the blade or handle groove is recommended.
7/24/25 I’ve added a foam pool noodle adapter for safer sparring matches!
_____________________________________________________________________________________________________________
Don’t forget to follow me, post a make, leave a like, or tell me what you don’t like so I can make improvements.
Thanks, and Happy Printing!
Also check out:
https://fabtechmfg.square.site/