1 / 3
Clip-On Hanger (20mm / 30mm / 40mm Panel Sizes) – No Screws Needed — zdjęcie 1
1 / 3

Clip-On Hanger (20mm / 30mm / 40mm Panel Sizes) – No Screws Needed

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Clip-On Hanger (20mm / 30mm / 40mm Panel Sizes) – No Screws Needed

Ocena
0 / 5
Polubienia
10
Pobrania
34
Wydruki
0
Wyświetlenia
91
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Organizers
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

This is a minimalist clip-on hanger designed to slide over flat surfaces such as wardrobe sides, cabinet panels, or doors with a 3 mm thickness. It's a simple and elegant solution to add extra hanging space without the need for screws, glue, or tools.

🧩 Features:

Designed for 3 mm thick panels (can be scaled for others)

This download includes three different STL files, each designed to fit panels or doors of different thicknesses:

20 mm 

30 mm 

40 mm

Simply choose the version that matches the thickness of the surface you want to clip the hanger onto.


If needed, the models can also be scaled or modified to fit custom sizes.

Ideal for hanging lightweight items: keys, lanyards, small bags, clothes, towels

 

🖨 Printing Recommendations:

Material: PLA or PETG (PETG recommended for flexibility and durability)

Infill: 30–50%

Perimeters: 3 or more

Supports: Not needed if printed flat

Layer height: 0.2 mm

⚠ Note:
This hanger is intended for lightweight use on 3 mm thick surfaces. Do not use for very heavy loads or rough handling unless reinforced or printed with stronger materials.

✅ Estimated Safe Load Capacity:

~1 kg per hook under typical 3D print conditions

Possibly up to 1.5–2 kg if:

You use PETG with at least 3 perimeters

50%+ infill

Reinforce the hook with a support rib underneath

📸 I’d love to see your prints!

Tagi