Fully printable Quad-Lock-Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A fully 3d-printable Quad-Lock mount. Fits all commercially available Quad-Lock cases.
- Ocena
- 5 / 5
- Polubienia
- 188
- Pobrania
- 2157
- Wydruki
- 3
- Wyświetlenia
- 18 005
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution
I really love the Smartphone cases from Quad-Lock and used them allready for the past few years. The only Problem is the Price and the Varaities of the Quad-Lock mounts. So I just 3d-printed my own ;-)
The here provided mount perfectly fits on to my bike handle (see pictures above) and holds my Quad-Lock-Phonecase extremly secure.
I also designed the “case-side” of the Quad-Lock system, so you can print yourself a complete Quad-Lock-Package.
I can't take credit for the spring, as I took the design from here: https://www.thingiverse.com/thing:2590838
Printsettings:
- Base and Top parts can be printed without support, Spring and Slider have to be printed with support.
- For the Spring PLA works best because it´s a bit stiffer then PETG, so it can provide more force.
Building:
- Put the Spring inside the Slider, it should be able to compress and decompress without getting stuck. You may need to sand down the Spring a bit.
- Insert a M3-Nut into the Base.
- Insert the Base into the Slider-Spring-Assembly
- Put in the Top from the other side and screw everything together with a countersunk M3-Bolt
- To secure the mount to the Bike, i just used Cable ties
Please keep in mind that the mechanism used, is patented by Quad-Lock. Therefore, this print is intended for private use only.