Aqara Doorsensor for Windowhandle, no soldering
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Holds your Aqara Sensor in Place and recognizes if Handle is closed, no Soldering required. 2 Magnets (5x3 mm) required
- Ocena
- 5 / 5
- Polubienia
- 20
- Pobrania
- 47
- Wydruki
- 1
- Wyświetlenia
- 751
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
Parts list:
2 Magnets in 5x3 mm
I experimented with smaller magnets but they did not give me consistent results, but the thicker Base fits nice.
If anyone wants i can make one for Round Handle Bases, just leave a comment.
Assembly Instructions:
Push 2 Magnets (5x3 mm) into the Sockets of the Inlay, it is Important to insert them with opposite polarity.
(You can easy test this with a 3rd Magnet, one Magnet on the Inlay should pull while the other pushes the same side of the 3rd Magnet)
This is a remix of those 2 Things from thingiverse:
https://www.thingiverse.com/thing:4722391
https://www.thingiverse.com/thing:4941257