1 / 5
Intex 29041 chlorine floater lid
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement lid for Intex 29041, as the one from the factory breaks and wears over time and becomes broken.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 42
- Wydruki
- 0
- Wyświetlenia
- 219
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
🔩 Improved Lid for Intex 29041 Floating Dispenser 💦
Did the original lid break or go missing? Here’s your fix! 🛠 I designed this replacement for the Intex 29041 chlorine floater after the clips on the original wore out – this one's been running strong for over 2 months with zero issues.
💡 What’s better about it?
- Thicker clips = stronger hold 💪
- Snaps in tight – needs a bit of force at first, but then it fits like a glove (or like a butt in a bucket 😄)
- Fully tested in the pool: water, sun, chlorine – no problem ☀💧
⚠ Important Notes:
- This model only includes the lid – the floater body is not part of the print.
- It is designed for the larger Intex 29041 floater only. If you have the smaller version, you'll need a different model!
🖨 Print info:
- Material: PETG (recommended for UV & water resistance) – but feel free to try PLA 😉
- Supports: yes but slicer says they are not needed(I don't trust it)
- Infill & layer height: standard settings, nothing fancy. But it keeps the job done.
- Print upside down.