Laundry Detergent Drip Tray
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Laundry Detergent Drip Tray mounts on the shelf below the spout of your laundry detergent to catch drips
- Ocena
- 0 / 5
- Polubienia
- 18
- Pobrania
- 32
- Wydruki
- 0
- Wyświetlenia
- 604
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
This Laundry Detergent Drip Tray mounts on the shelf below the spout of your laundry detergent to catch drips. The mounting clips slide onto a shelf up to 13/16" (21mm) thick and can be screwed into place if desired. It is intended for the type of detergent containers that lay on their side and dispense liquid detergent through a spout - as seen in this photo:
To assemble your Laundry Detergent Drip Tray, press the two clips onto the sides of the tray until they click into place.
The following photo shows the assembled Laundry Detergent Drip Tray:
I have provided STEP (.stp) files to allow modifications to my design.
PrusaSlicer 3MF files have been provided.
A G-code file has been provided for the Original Prusa MK4 for PETG.
The Laundry Detergent Drip Tray seen in the photos was printed with Prusament Signal White PETG with a 0.4mm nozzle at 0.2mm layer height with a 15% gyroid infill.
Be sure to check out my other designs - including universal key covers and a diverse collection of household accessories and 3D printing tools - on Printables at https://www.printables.com/@PhilCaruso/models