Sony HT-NT5 Sound Bar Wall Mount Replacement
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a reproduction of the wall mount on a Sony HT-NT5 sound bar.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 56
- Wydruki
- 0
- Wyświetlenia
- 526
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Living Room
- Licencja
- Creative Commons — Attribution — Share Alike
I received a Sony HT-NT5 sound bar from someone and it was missing the original wall mount brackets. These go for around 20 euros online for the original brackets, plus shipping. I decided to quickly model a replacement based on photos of the original mounts.
Note: These are not direct replacements for the original mounts. I cannot guarantee the holes are in the same place. Thus, you must print these as a pair to ensure the mounts are the same.
You will need 2xM5x10 bolts to secure the parts to the sound bar, and of course, drywall plugs and screws to mount it to the wall.
You will need supports for the two “pegs” which locate into the back of the sound bar and part of the key hole slot.
Shout out to the guy 3D printing these and selling them on eBay for $20+USD. Oops, I guess I ruined your business! 😃