Helical Spring - printed sans supports
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Helical compression spring with squared off ends
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 102
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Out of sheer academic interest I wanted to see if I could print a particular compression spring with rectangular X-section sans supports - i.e., one with 48mm OD, 10 mm width and 8mm pitch in PETG. I succeeded but only with a bed contacting pad at each turn, which admittedly severely limits the springs range of motion. I had to carefully experiment with the diameter of the pads in an effort to keeping them at a minimum size and the part on the bed. You can see that I succeeded with the afore mentioned qualifier. This part design is also an excellent challenge for newcomers to the lovely world of CAD.