1 / 8
FlashForge AD5X Filament Side Slide Poop Chute
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Compact non-blocking side filament discharge chute (Second Edition).
- Ocena
- 0 / 5
- Polubienia
- 45
- Pobrania
- 524
- Wydruki
- 0
- Wyświetlenia
- 4053
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 7)Remiksy (0)Kolekcje (47)Powiązane
This poop chute is designed to fit the FlashForge AD5X multi-color 3D printer. It can be mounted with magnets (brand and size shown in photo gallery) or foam-core double stick art tape. It has the following features:
- Compact design that doesn't require a lot of space behind printer
- Ideal for tables, racks, or desks. Waste can drop into a basket on the floor located at the side.
- Non-blocking design. Power switch, and rear ports remain easily accessible
- Allows full cooling. Air vents are not blocked
- Designed to print flat on build plate to require minimum supports
- You can download the "Open Sans" font from Google shown in the picture gallery and use the slicer text feature to emboss. Font used is Open Sans Condensed ExtraBold. Text Height is set to 35.0 mm, Depth is set to 0.30 mm, and Boldness is set to 3000.
- Though I recommend using the .3mf file, you can load the .stl and rotate it 140 degrees, then move it to fit the print bed
Change Log V3.4 (Second Edition)
Taller wall on curved section to help contain Poop flinging
- Third foot added for extra magnet to help the chute stay secure
- Smoothing of the model base for better bed adhesion
- Lower Profile Lettering/Branding in .3mf file to prevent poop hops
- Photos updated